
SY-GPON-8OLT
Our SY-GPON-8OLT complies with ITU-T G.984/G.988 and meets requirements about GPON OLT in Network Access Technical Requirements.


Our GPON 2 Port OLT products are 1U height 19 inch rack mount products. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to be deployed in compact room environment. The OLTs can be used for “Triple-Play”, VPN, IP Camera, Enterprise LAN and ICT applications.
| Model | SY-GPON-2OLT (Two Port GPON OLT) |
|---|---|
| Chassis | Rack 1U 19Inch Standard Box |
| Uplink Port QTY | 4 |
| RJ45 (GE) | 2 |
| SFP(GE)/SFP+(10GE) | 2 |
| GPON Port QTY | 2 |
| PON Physical Interface | SFP Slots |
| Supported PON module level | Class C++/Class C+++/Class C++++ |
| Max splitting ratio | 1:128 |
| Management Ports | 1*10/100/1000BASE-T out-band port, 1*CONSOLE port, 1*USB-COM, 1*USB2.0 |
| Backplane Bandwidth (Gbps) | 208 |
| Port Forwarding Rate (Mpps) | 40.176 |
| Transmission Distance (Class C+++) | 20KM |
| PON port speed | Upstream 1.244Gbps, Downstream 2.488Gbps |
| Wavelength | TX 1310nm, RX 1490nm |
| Connector | SC/UPC |
| Fiber Type | 9/125μ SMF |
| TX Power | +4.5~+10dBm |
| Rx Sensitivity | ≤ -30dBm |
| Saturation Optical Power | -12dBm |
| Standards | ITU-T G984/G.988 |
| Management Mode | WEB , Telnet , CLI |
| Management Function | SNMP, Telnet, CLI, WEB, SSH v2; Fan Group Control; Port Status monitoring and configuration management; Online ONT configuration and management; User management; Alarm management |
| Layer 2 Switch | 16K Mac address; Support 4096 VLANs; Support port VLAN; Support VLAN tag/Un-tag, VLAN transparent transmission; Support VLAN translation and QinQ; Support storm control based on port; Support port isolation; Support port rate limitation; Support 802.1D and 802.1W; Support static LACP, Dynamic LACP; QoS based on port, VID, TOS and MAC address; Access control list; IEEE802.x flowcontrol; Port stability statistic and monitoring |
| Multicast | IGMP snooping; 1K L2 Multicast Groups; 1K L3 Multicast Groups |
| ONU Management | Profile Management; ONT auto discovery; Auto configure; Auto upgrade; Remove Config |
| DHCP | DHCP server, DHCP relay, DHCP snooping; DHCP option82 |
| Layer 3 Route | ARP proxy; 16K hardware Host Routes, 1024 hardware Subnet Routes; Support static route; Support Radius, Tacacs+; Support static route, dynamic route RIP v1/v2, RIPng and OS |
| IPv6 | Support NDP; Support IPv6 Ping, IPv6 Telnet, IPv6 routing; Support ACL based on source IPv6 address, destination IPv6 address, L4 port, protocol type, etc; Support MLD v1/v2 snooping (Multicast Listener Discovery snooping) |
| GPON Function | Tcont DBA; Gemport traffic; In compliant with ITU-T G.984; Up to 20KM transmission Distance; Support data encryption, multi-cast, port VLAN, separation, RSTP, etc; Support ONT auto-discovery/link detection/remote upgrade of software; Support VLAN division and user separation to avoid broadcast storm; Support power-off alarm function, easy for link problem detection; Support broadcasting storm resistance function; Support port isolation between different ports; Support ACL to configure data packet filter flexibly; Specialized design for system breakdown prevention to maintain stable system |
| Dimension (L*W*H) | 442mm*200mm*43.6mm |
| Weight | Net weight of single power: 2.485kg |
| Power Consumption | 35W |
| Working Temperature | -20°C ~+60°C |
| Storage Temperature | -40~+70°C |
| Relative Humidity | 5~95% (non-condensing) |

Our SY-GPON-8OLT complies with ITU-T G.984/G.988 and meets requirements about GPON OLT in Network Access Technical Requirements.

Our SY-GPON-16OLT is a 1U height 19 inch rack mount products. The features of the OLT are small, convenient, flexible, easy to deploy, high performance.

Our SY-GPON-4OLT complies with ITU-T G.984/G.988 and meets the requirements for GPON OLT in Network Access Technical Requirements.

Our SY-GPON-1OLT is a box type GPON OLT with one PON port, the splitting ratio of its PON Port is 1:128, and the fastest transmission Distance is 20km.
Our team will confirm the right model for your network.